El Capitan Dmg To Bootable Usb

/ Comments off

Warning: Please follow these instructions at your own risk. I am not responsible for any damage or information loss that could result from following this guide. Also, note that installing OS X on PC is illegal. Please buy a real Mac if you're satisfied with your Hackintosh. This guide is for evaluation purposes only.

Apr 04, 2021 An El Capitan.DMG is downloadable directly from the Apple Support page, which provides instructions on how to make a bootable volume, with a major caveat On a Mac that is compatible with El Capitan, open the disk image and run the installer within, named InstallMacOSX.pkg. Create Bootable USB for Mac OS X El Capitan with TransMac. How To Create Bootable Usb For Os X El Capitan Download. A new pop up box will appear, click on the three-dots, and then select the macOS X El Capitan.DMG file from Windows. Then click on OK. Since the file is huge so it will take quite time to complete. Anydesk free download for. Create Bootable Usb From Dmg El Capitan Download; Os X El Capitan Create Bootable Usb From Dmg; After a few minutes, the system creates a bootable USB drive that has the El Capitan installer. Enter the following path to the terminal. Take the El Capitan iso or dmg installer. Jan 24, 2018 Download Mac OS X 10.11 El Capitan.ISO – Download El. Download PowerISO and install it in your Windows PC. Step 2.: You can import the DMG file directly by clicking on ‘Burn' in. Step 3.:Now review the settings to select the burn speed. Step 4.: Now click on 'Burn' and wait. To create a bootable USB drive from a DMG file on Windows, you will need to have the right utility.

Requirements

  • An Intel-based PC with UEFI bios
  • A USB flash drive with at least 16GB capacity
  • A dedicated hard drive (SSD highly recommended)
  • A computer running OS X (10.9 or later) for preparing the installation USB flash drive

I chose to avoid the UniBeast installer (by Tonymacx86) because of its commercialized nature, as described here. Here is a vanilla guide to installing El Capitan on your PC!

Preparing the USB Installation Drive

First things first. We need to prepare a USB thumb drive that will contain the installation files as well as the bootloader and custom kexts for our specific Hackintosh build.

Download El Capitan from the Mac App Store

Head over to your existing OS X environment running 10.9 or later and open the Mac App Store.

Search for 'El Capitan' and click Download. The download is completely free if you're running OS X 10.9+.

Wait for the download to finish (this could take some time).

El Capitan Dmg To Bootable Usb Free

Format the USB Drive

Open Disk Utility in Applications/Utilities and locate your USB device. Make sure you've backed up anything important on that drive as it will be erased forever.

Select it, and then on the right, click the partition tab.

  1. Click Curent Layout and change it to 1 Partition.
  2. Set the Name to USB.
  3. Set the Format to Mac OS Extended (Journaled).
  4. Click Options and select GUID Partition Table.

Click Apply to format the drive.

Copy the Installation Files to the USB Drive

Now that we've downloaded the installation files from the Mac App Store and formatted our USB drive, let's copy the installation files to it.

Run the following command in the Terminal (Applications/Utilities):

The command will run a script inside the Install OS X El Capitan application that will copy the installation files to the USB drive.

This process takes about 15 minutes. Go out for a quick run, or a hamburger, or both. When you come back, it should have finished.

Installing a Bootloader

If you tried to boot from the USB drive as is after the previous step on a PC, it wouldn't work. We need a bootloader that makes it possible to boot OS X on x86 and x86_64 PCs.

There are 3 popular bootloaders to choose from.

  • Clover
  • Chameleon
  • Chimera

I went with Clover as it seems to be the most popular choice among other El Capitan installers, mostly for the following reasons:

Clover is an open-source EFI-based bootloader created on Apr 4, 2011. It has a totally different approach from Chameleon and Chimera. It can emulate the EFI portion present on real Macs and boot the OS from there instead of using the regular legacy BIOS approach used by Chameleon and Chimera. For many, Clover is considered the next-gen bootloader and soon it will become the only choice since BIOS in being replaced by UEFI in every new motherboard. One big feature of Clover is that iMessage, iCloud, the Mac App Store works along with Find My Mac, Back To My Mac and FileVault since Clover can use the EFI partition. (Read more)

Install Clover on Your USB Drive

Installing Clover on your USB drive is relatively easy. It involves running an installation wizard and selecting some options.

Download the latest Clover installer from here.

  1. Run the installer.
  2. Click Continue twice.
  3. Click Change Install Location and set it to your formatted USB drive.
  4. Click Customize and check the following options:
    • [x] Install for UEFI booting only
    • [x] Install Clover in the ESP
    • [ ] Drivers64UEFI
      • [x] OsxAptioFixDrv-64 - fixes memory map created by AMI Aptio EFI. Booting OS X is impossible otherwise.
  1. Click Install and wait for the installation to finish. It shouldn't take more than a minute.
Copy Essential Kexts to the USB Drive

Next, we'll need to copy some kexts (kernal extensions, similar to drivers on Windows) to the USB drive.

  • FakeSMC.kext - open source SMC device driver/emulator developed by netkas. Tricks OS X into thinking it's installed on Apple hardware. Absolutely required for Hackintosh installation.
  • NullCPUPowerManagement.kext - disables AppleIntelCPUPowerManagement.kext which may cause kernel panics when you try to boot from the USB drive. It's optional, copy it only if you get an AppleIntelCPUPowerManagement-related kernel panic.
  • ApplePS2Controller.kext and AppleACPIPS2Nub.kext - adds support for PS2 devices (such as PS2 keyboard/mouse). They're optional, copy them only if you still use PS2 devices.

Download these files from here and copy them to the EFI mounted volume at /EFI/Clover/kexts/10.11/.

Now that the installation USB drive is ready, let's install OS X El Capitan!

Boot from the USB Drive

Restart your computer and boot from the USB drive (Press Esc/F8/Del to access the boot selection menu).

Use the arrow keys to select Boot OS X Install from Install OS X El Capitan (It should be selected by default). Press the spacebar and select Boot Mac OS X in verbose mode. Verbose mode means that you'll be able to see exactly what's going on under the hood as OS X attempts to boot up its installer. You'll be able to see the exact error message if booting fails.

Press Enter and cross your fingers. Clover will now boot the installer from your USB drive. This could take some time, in my case, it takes around 5 minutes (Don't worry -- the startup time is around 5 seconds after installing on an SSD).

Did it fail?

It's more than likely that the boot will fail. Don't panic (ha-ha), as kernel panics usually mean that you forgot to copy an essential kext to the EFI partition. Look up the exact error you're getting before the boot log comes to an end and search Google for a solution.

Once you find an additional kext that your system needs, you'd attempt to copy it to the EFI volume, only to discover that it's gone! Not to worry, it's just unmounted and hidden. Follow this guide to mount the hidden partition, and then, follow the Copy Essential Kexts section above to copy it to the USB drive's EFI partition.

Format the Target Hard Drive

Once the installation wizard boots, the next step is to prepare the hard drive that you want to install OS X on.

Click Continue, followed by Disk Utility.

Select the target drive to install to (not the USB drive!) and click the Erase button. Make sure to back up anything important on that drive, as it will be deleted forever.

  1. Set the Name to El Capitan.
  2. Set the Format to OS X Extended (Journaled).
  3. Set the Scheme to GUID Partition Map.

Click Erase to format the drive.

Install OS X to the Target Drive

Exit the Disk Utility and click Install OS X.

Click Show All Disks and select the drive you just formatted to install OS X on it. Finally, click Install.

The process takes about 25 minutes. Be patient. For me, it hung at the end ('1 second remaining') for around 5 minutes. Don't be tempted to reset or cancel the installation.

When that's done, the system will reboot. Make sure to boot from the USB device again, and select Boot OS X Install from Install OS X El Capitan once again, in verbose mode. The installation is a two-part process that continues once you re-boot into the USB drive.

Finally, after about 25 more minutes, OS X El Capitan should be successfully installed on the target drive.

Boot into El Capitan via the USB Device

After the second reboot, boot from the USB device once again, but this time, select Boot OS X from El Capitan, and select verbose mode.

Press Enter and cross your fingers again. If all goes well, you'll be presented with the setup wizard:

Take a minute to set up your new Hackintosh. Once you're done, there are a few things you need to do to finish off the installation.

Reinstall Clover on the Hackintosh Drive

In the previous step, we used Clover on our USB drive to boot our Hackintosh. This is fine, but most of us aren't going to keep that USB drive plugged in forever. Let's make it possible to boot El Capitan independently by reinstalling Clover on it.

Go back up to the Install Clover on Your USB Drive section and follow the steps again, but this time, select your El Capitan volume instead of the USB drive.

Once again, copy the essential kexts to the EFI partition that shows up after installing Clover.

Finally, make sure to add Clover EFI boot options which is possible by pressing Clover Boot Options in the Clover boot window (if there are 2 boot options -- find the one for your SATA drive). I literally spent 3 hours figuring out why Clover would not boot when I disconnected the USB drive before I figured out that I need to manually add the EFI boot options.

Now you'll be able to boot directly from the El Capitan hard drive, as it should be!

Audio and Networking

If you're lucky, audio and networking will work right out of the box. If not, you're on your own from here. You'll need to research your exact hardware (by using System Information in Applications/Utilities) and searching Google to find the right kext or installer to make it work on El Capitan.

Clover Themes

The default Clover theme is pretty ugly (no offense). Check out this theme database to improve Clover's appearance.

This is YosemiteLogin by xenatt:

Enjoy!

That's it! Enjoy your new Hackintosh, and if you absolutely love it, consider buying a Mac!

EI Capitan (10.11) is the last release of OS X. After it, the OS versions are under a name called macOS. From our observation, there are still many people using EI Capitan on their Mac as some of the apps are not running on macOS. Hence, if your Mac was something wrong with it and you need to create a bootable installation media to reinstall OS X EI Capitan on your Mac. Honestly speaking, it is a tough process for EI Capitan and you might receive errors when using the dmg file downloaded from Apple website.

Please don't worry. In this tutorial, we will share you all the necessary steps to make a bootable EI Capitan bootable USB on a Windows 10 PC. Here is a screenshot of our tutorial's output.

P.S. If you have a Mac, then please follow this official guide to create EI Capitan USB installer on macOS by using createinstallmedia command: https://support.apple.com/en-us/HT201372

sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/USBVolume --applicationpath /Applications/Install OS X El Capitan.app

Preparation

Please get started, there are a few things you should prepare for.

First, a USB drive with at least 16 GB storage as the installation file of EI Capitan (.dmg) is over 5.5GB. USB 3.0 is more recommended as it has faster reading and writing speed. This will save a lot of time.

Secondly, download EI Capitan (10.11.6) DMG file from this link: This is the modified version of Apple's dmg file dedicated for USB booting.

Convert El Capitan Dmg To Bootable Usb

Warning: The download file hosted on Apple.com (InstallMacOSX.dmg) will only work on Mac platform. For creating installation media on Windows, please use the above link instead. The dmg file provided by Apple contains a .pkg file in DMG archive, which will result failure if you are using it on a PC.

Tutorial: How to Create EI Capitan Bootable USB on Windows 10 PC

To make a bootable USB from EI Capitan dmg file, we need a special software in place. In our case, it is UUByte DMG Editor, an award-winning app for creating bootable OS X and macOS USB installer.

Step 1: Install UUByte DMG Editor on your PC and open it from Desktop shortcut. After that, plug in a USB drive into the computer and eject other unused USB devices.

Step 2: Click Burn button from welcome screen and import downloaded EI Capitan DMG file into the program. You will also see USB drive name in second field.

Step 3: Click Burn button at the bottom to write dmg file to USB drive. There is a progress bar on the screen. This tells how much time left for the burning task.

Step 4: Wait for 5-10 minutes and a bootable EI Capitan installation disk is created. You need to wait more time for USB 2.0 device.

Install OS X EI Capitan on Your Mac

Before installation starts, make sure the hardware meets the minimal requirements of EI Capitan. You can check it from here: https://support.apple.com/kb/SP728?locale=en_US

To install EI Capitan from USB, please insert the bootable disk into Mac. Keep pressing Option button during startup. You will see a drive name (Install OS X EI Capitan) on startup window. Click on it to enter into OS X Recovery mode.

El Capitan Dmg To Bootable Usb

From macOS Utitilies window, click Reinstall macOS and follow the screen prompt to install EI Capitan on your Mac.

El Capitan Dmg To Bootable Usb Mac

The above is a complete tutorial that shows you how to easily create a bootable USB installer from EI Capitan DMG file on a Windows PC. And this is the easiest method you could find. No complex settings and command line!